How To Install Bike Drink Holder

Updated on March eight, 2022

With the growing popularity of eyelet-mounted bags and cargo cages, bike tourers and bikepackers are increasingly looking for ways to add mounts to their fork or downtube to attach such accessories. In addition, many desert routes and trips through warmer climates crave extra hydration, and so mounting extra canteen cages or oversized cages under the downtube, on the fork, or fifty-fifty on the chainstays is often a necessity for supplementing water chapters. These affordable workarounds tin can besides serve to upgrade older bikes for those looking to try their hand at bikepacking but without the greenbacks to invest in a dedicated rig.

Braze-ons, Bosses, and Eyelets

Before moving on, allow'southward clear up some terminology.

Braze-on, a common term used to reference a bolt mountain on a bicycle, is defined as a small fitting on a bicycle that has been permanently attached to the frame. The term comes from how these parts were attached to traditional steel frames. Even though these fittings may be welded onto titanium or aluminum, or glued and molded into carbon, affix-on lives on as a style to describe these mounts. Typical braze-ons include cable stops/guides, rack and bottle cage mounts, or, even more than bemusing, bosses.

Bosses are usually interpreted as welded, brazed, or attached protrusions, such as a cantilever brake bosses, rack bosses, shift lever bosses, or even cable guides. However, in the framebuilding parts world, bottle bosses are also very commonly sold as threaded inserts, or as we know them, canteen bosses. All that said, each of these terms is fine and cracking, just since the term braze-on doesn't ever perfectly describe the threaded attachment used for cages and muzzle-mount bags, we'll refer to these as either mounts, eyelets, or bosses.

Ultimately, more than and more bike frames are existence outfitted with extra cage mounts and bottle bosses, especially bikes intended for touring or bikepacking. Provisions often include a pair (or triplet) on the underside of the downtube, as well every bit a three-pack of bosses on each fork blade (see our Gear Index of Forks with Bottle Cage Mounts). However, some bike companies are nevertheless anti "fork warts." And, many older bikes were relegated to two pairs within the frame triangle. Fortunately, there is an ever-growing list of products made to add together cage mounts to your bike with various connection techniques. Notice that full production list below, and so scroll down to notice several DIY methods for adding bottle cages and mounts.

• $fifty

  

  Boulder Honaker

  • Type: Soft Water Bottle Cage
  • Made of: X-pac/Rhinotec/Cordura
  • Attachment: Velco Straps
  • Bottle Size: Nalgene 32oz

  We're firm believers that every wheel should feature canteen muzzle mounts on the underside of its down tube, bar a few suspended 26ers, where clearance is tight. Information technology's a no-brainer area for water storage; the centre of gravity is kept depression, and at that place'due south rarely any interference with terrain or obstacles. Unfortunately, all also many bikes skimp on such potential for water hauling. Boulder's Honaker Hydro Pack comes in handy for just such scenarios, designed as it is to concord a 1L Nalgene bottle, via a bag strapped to your bike's downwardly tube.

  The Honaker features with a strip of Velcro sewn in vertically, as well as an agglutinative backed strip for the downwards tube of the bike. This doesn't act equally support, only works to keep the bag from rotating or sliding. At that place are two main straps that hold the bag in place; each has a rubberized bankroll cloth where they make contact, providing a secure anchor point. The spindrift collar is designed to keep the bottle clean, a nice feature when riding in cattle land. It was originally designed to fit a standard 700-800ml h2o bottle, merely at present has been updated to fit a larger Nalgene. We tested it using the Zefal 1L Magnum.

  We used the Honaker mounted to the Marin Pine Mountain ii on our trip in southern Kingdom of spain. Information technology worked flawlessly, and we rode some crude stuff. The only complaint is that it was a little tough to become the bottle in and out without undoing the straps a footling. Only if you approach it as storage for a backup bottle for campsite utilise, information technology'southward perfect. Overall it's a ruggedly built production that works well for bikes without down tube mounts

  • Weight: 77 grams (2.7 oz)
  • Cost: $l
  • Place of Manufacture: Colorado, USA
  • Manufacturer'due south Details: Link
  contract Close

• £x

  

  DrJ0n Barnacles

  • Type: Bottle Cage Mount
  • Fabricated of: Plastic, brass, steel
  • Attachment: Clamp

  The Barnacle by Drj0n Bagworks provides a low-profile mounting option for bottle and cargo cages on the fork, downtube, or other locations on a bike frame. The Barnacle clamp is 3D-printed from durable plastic and comes in 9 diameters ranging from 25.4mm to 47mm, designed to fit normally available downtubes in steel, aluminum, and titanium, and also rigid steel and pause forks. You tin can also utilise rubber strips to help accommodate varied tubes. For case, 45mm with a 1mm condom strip fits a Fox 34 or a Play a joke on 36 without.

  Each Barnacle uses an M5 bolt and swivel nut to secure it to the tubing and a brass M5 threaded boss embedded into it. Although they tin can handle more, Jon suggests loading the Barnacles up with no more than ane,000 grams will have negative effects on the bike'south handling (when mounting to the fork), and should be avoided. Find more at our press release hither.

  While we haven't tested the Barnacle specifically, nosotros have put some miles on the DeWidget G-Funk Clamps, which are the same pattern and we have no problem vouching for their operation and reliability.

  • Price: £10
  • Identify of Industry: Britain
  • Manufacturer's Details: Link
  contract Shut

• $6

  

  King Muzzle Universal Support Bolt (USB)

  • Blazon: Bottle Cage Mountain
  • Made of: Stainless Steel
  • Attachment: Clench

  The stainless steel Rex Cage USB (Universal Support Commodities) is a versatile solution for bikes without bottle cages, or suspension forks. More often than not speaking, we've been impressed by the build quality and idea that King put into these little gadgets. Since our beginning test, which went relatively well, the USBs have been redesigned. This is a welcome alter since we had a couple break when not properly tightened. The updated versions shown here include a beefier post mount area which looks bombproof. We'll update our review with more feedback in one case we put them through the wringer.

  Considering that many new bikes are missing a pair of canteen bosses under the downtube, and at that place's no such thing as a suspension fork bottle mountain, the USB is a good selection. Information technology comes in four sizes: 1 ane/viii-inch for handlebars and seat stays, 1 3/8-inch for steel frames and forks, ane 5/eight-inch for 32mm suspension forks, and 2-inch for aluminum tube bikes and 36mm suspension forks. Note that because the muzzle attaches via a postal service mount, the nut goes onto the cage and some bottle cages might not work if they don't have a recessed channel.

  • Weight: 13 grams (0.5 oz)
  • Toll: $6
  • Place of Manufacture: Colorado, United states of america
  • Manufacturer'due south Details: Link
  contract Close

• $69

  

  Revelate Designs Joey Downtube Bag

  • Blazon: Cargo Pocketbook
  • Fabricated of: 10-Pac
  • Attachment: Velcro Straps
  • Book: 2L

  The Revelate Designs Joey attaches under the down tube on most whatsoever bicycle, just to a higher place the bottom bracket. Requiring only two velcro straps to attach, the Joey provides a viable solution for calculation gear or water storage chapters to bikes without mounts at that position.

  A layer of strong foam against the back of the handbag gives it structure and some padding when strapped to your downtube, and it'southward covered in a grippy rubber cloth and shaped to hug cylindrical tubing. Information technology's constructed from VX21 Ten-Pac and uses a standard roll-top closure to avoid dealing with dirt covered zippers.

  The compression molded dual density cream used in the contact panel provides just the correct amount of structure to this bag, and the rubberized outer material paired with the silicon-coated straps do an excellent task of keeping it in place. For bikes without bottle mounts under the downtube, the Joey offers a nicely designed solution for calculation a little fleck more storage, for either gear or water.

  • Weight: 130 grams (4.6 oz)
  • Price: $69
  • Identify of Industry: Oregon, USA
  • Manufacturer's Details: Link
  contract Close

• $60

  

  Rogue Panda Bismarck Bottle Bucket

  • Type: Handlebar Canteen Cage
  • Made of: X-pac/Cordura/plastic/etc
  • Zipper: 2 Straps
  • Bottle Size: Standard Canteen

  You tin can use almost any stem mounted bag to hols a standard water canteen, just Arizona-based Rogue Panda built one with around a lightweight bottle muzzle and fabricated it specifically to conduct piece of cake admission water without mounts, in a handy location. Nosotros've been testing i for months and really similar it. Stay tuned for the review.

  • Weight: 133 grams (4.7 oz)
  • Price: $60
  • Identify of Manufacture: AZ, USA
  • Manufacturer's Details: Link
  contract Close

• $40

  

  Tailfin SFM (Suspension Fork Mounts)

  • Type: Bottle Cage Mount
  • Made of: Carbon, Rubber, Steel
  • Attachment: Clamp

  Tailfin Pause Fork Mounts – or SFMs for curt – allows bikepackers to adhere either two water bottle cages per fork leg, a h2o bottle and cargo muzzle combo, or whatsoever other variation. Two stainless steel button head bolts are likewise provided per SFM mount, covering you for two cages per side. And each fix includes two mounts, which is plenty for one fork leg. At that place are even two versions of the SFM available. One weighs but 82g per pair and uses a carbon fibre ring, while the other tips the scales at 128g and is made from stainless steel.

  The SFM clamps onto the fork using an a bolt and hinge-nut. Each ships with three rubber 'fries' of differing thicknesses, along with three bolts of differing lengths (xx-35mm long), allowing proper sizing for a variety of forks. At that place'southward also a nice educational activity sheet and measuring bar that makes installation uncomplicated. You can find detailed rundown in our review.

  While they're not cheap, Tailfin has created a production with a loftier level of design, technology, durability, and cease, and until you lot really handle them and fit the SFMs, it's hard to convey how well made they actually are. We remember the SFM is perchance one of the amend and more elegantly designed options we've tried for employ with a interruption fork. Logan and Virginia recently put nearly 2,000 miles on iv pairs in Baja and Oaxaca, with no bug to speak of.

  • Weight: 132 grams (4.seven oz)
  • Cost: $twoscore (per pair)
  • Place of Manufacture: Red china
  • Manufacturer's Details: Link
  contract Close

• $19.95

  

  Wolf Tooth B-RAD Bases

  • Type: Canteen Cage Mount, Alt Position
  • Fabricated of: Aluminum
  • Attachment: Commodities or Zip Tie

  Short for Bottle Relocation and Accessory Device, B-RAD was created to aggrandize and maximize the potential of your bicycle'due south preexisting bottle mounts. The system consists of three dissimilar machined 6061-T6 aluminum mounting bases—the B-RAD ii, 3 and iv—and a growing number of mountable accessories. Each base has several bosses and multiple muzzle locations, as well as a sliding slot mount to attach to your bike's existing bosses. Amongst many other specific uses, each base tin shift a bottle cage abroad from rear shocks, add room for tools or spare tubes beneath a bottle muzzle, or fifty-fifty provide space for a 2d canteen (or double bottles) on sufficiently long downtubes. In addition, Wolf Tooth provides rubber pads and aught ties and then that the B-RAD bases can exist attached to a bossless fork blade, suspension fork, or downtube.

  • Weight: 26 grams (0.9 oz)
  • Toll: $nineteen.95 (2-slot base)
  • Place of Industry: Minnesota, U.s.a.
  • Buy local, or at Amazon  Jenson assistance We highly encourage you to buy from a local shop when possible, but if you're going to purchase online, you can use our affiliate links. We'll go a very small-scale kickback that will assist back up this site.
  • Manufacturer'south Details: Link
  contract Shut

• $12.79

  

  76 Projects Water Bottle Spacemaker

  • Type: Canteen Cage Adapter
  • Made Of: Nylon
  • Zipper: 2 Muzzle Bolts

  As the name may suggest, the Water Bottle Spacemaker by Uk-based 76 Projects offsets your bottle muzzle by 12-37mm to work effectually other cages or two make room for a frame handbag. This mounting solution is platonic when running ii bottles in a small frame or on full-suspension bikes. The Spacemaker is fabricated from laser sintered Nylon and supplied with stainless steel mounting hardware. For additional storage, check out 76 Projects' The Piggy—designed to neatly tuck a spare tube or repair kit under a bottle when space is express.

  • Price: $12.79
  • Place of Manufacture: UK
  • Manufacturer's Details: Link
  contract Close

• $18AUD

  

  Adventure Hydration Cage Mount Adapter

  • Blazon: Canteen Muzzle Mount
  • Made of: Plastic
  • Attachment: Hose Clamps

  From Adventure Hydration: "The Muzzle Mount Adaptor is a unproblematic way to provide a mounting solution for all types of cages to fork legs, down tubes etc. Sure, they've been done earlier, simply what is unlike about this ours is the V department underside which provides ii lines of contact and so greater mounting stability. The Cage Mountain Adaptor uses the aforementioned robust condiment manufacturing procedure that is used for our Cranktank4 Caps, Tube Keepers and Wedgie. In fact, two prototypes have travelled both the GDMBR and the Bout Aotearoa. We prefer utilising stainless hose clamps to secure these to the bike but, as, the former elementary method of cable ties and self adhesive tape will do the job besides. Information technology includes: i Muzzle Mountain Adaptor, 3 10 5 mm x 16 mm bolts plus washers and nuts, 1 Cocky Adhesive Rubber Strip"

  • Price: $18AUD
  • Place of Manufacture: Australia
  • Manufacturer's Details: Link
  contract Close

• $97.95

  

  BarYak Mule Kit

  • Type: Canteen Cage Mountain, Alt Position
  • Fabricated of: Aluminum
  • Attachment: Bolt or Zilch Necktie

  The BarYak mule kit works like to the Wolf Tooth B-RAD system. The kit includes viii socket head cap screws, six heavy-duty UV cable zip ties, and two aluminum 17 x 3/8″ BarYak Mule. The system is rated at 175 lb tensile strength.

  • Price: $97.95
  • Manufacturer'south Details: Link
  contract Close
• 

  BBB AdaptRail

  • Type: Bottle CAGE MOUNT, ALT POSITION
  • Made of: Aluminum
  • Attachment: 2 Cage Bolts

  Concerningly similar to Wolf Tooth's B-RAD Bases, the BBB AdaptRail is a rail organisation that helps relocate bottles and other cargo to work around different frame sizes and bags, and open up up new mounting points for extra bottles or gear. It comes in three unlike sizes, is made from aluminum, and ships with stainless steel hardware.

  • Place of Industry: Prc
  • Manufacturer's Details: Link
  contract Shut
• 

  BBB DualMount

  • Blazon: BOTTLE CAGE Mountain, ALT POSITION
  • Fabricated of: Aluminum
  • Zipper: 2 Cage Bolts

  The DualMount is a solution for mounting two bottle cages side by side. The aluminum brackets can be mounted straight to standard bosses using the included mini rails, or strapped to a fork leg or tube using their HaulerMount. The brackets provide two standard cage bosses, commencement just enough to run them side past side for when you demand extra water capacity.

  • Place of Manufacture: China
  • Manufacturer's Details: Link
  contract Close
• 

  BBB HaulerMount

  • Type: Bottle Cage Mount
  • Made of: Plastic
  • Attachment: Velcro Straps

  The BBB HaulerMount is a universal bottle cage strap that attaches directly to your bicycle using a broad, silicone-backed, velcro strap and a mountain with standard canteen mounts. The actual mount is besides backed with rubber so things don't shift around.

  • Identify of Manufacture: China
  • Manufacturer'south Details: Link
  contract Shut

• $55CAD

  

  BikePackers Foundry Canteen Cradle

  • Type: Soft Water Bottle Cage
  • Fabricated of: X-Pac / Nylon
  • Attachment: Velcro Straps

  The Bottle Cradle is a textile top-tube mounted harness that tin be used for quick access items similar standard h2o bottles or larger Nelgenes. It is held in identify with several velcro straps, and an adaptable rubberband cord to continue the bottle in place. Information technology is made in Canada using VX-21 X-Pac, polyester webbing, and plastic stiffeners. BikePackers Foundry as well makes what they phone call the Straddle Bag, which is another option for calculation some more attainable storage on bikes with limited mounts / bosses.

  • Price: $55CAD
  • Place of Manufacture: Canada
  • Manufacturer's Details: Link
  contract Close

• $20

  

  Cleaveland Fork Clamp Mount

  • Type: Canteen Cage Mount
  • Fabricated of: Aluminum
  • Attachment: Hose Clamps

  The Cleaveland Fork Clamp Mount is designed to mount a Cleveland Everything Bag or other large bottle cages to your rigid fork, suspension fork, downtube, or anywhere else it may exist useful. The all new hose clamp mount is locally CNC machined from 6061-T6 alloy with three M5 x 0.8 holes at 2.5 inch spacing. This allows it to mountain whatsoever three hole cargo cage or a single bottle cage. The kit also includes three stainless steel hose clamps, 1.25" – i.6255" diameter range – measure your fork ahead of time to make certain this will work.

  • Weight: 57 grams (two oz)
  • Price: $20
  • Place of Manufacture: USA
  • Manufacturer'due south Details: Link
  contract Close

• $39.9

  

  Cyclewerks Canteen Cage Double Adaptor

  • Type: Double Bottle Mount
  • Made of: Stainless steel
  • Attachment: 2 cage bolts

  The Cyclewerks Bottle Cage Double Adaptor is a side-past-side bottle mount for maximizing your on-bike water storage. Each adapter is manufactured in Wellington, New Zealand, from corrosion-resistant 316 stainless steel. It is available in 45, 60 and 90 degree mounting options.

  • Weight: 55 grams (1.ix oz)
  • Toll: $39.nine
  • Place of Manufacture: New Zealand
  • Manufacturer's Details: Link
  contract Close

• £iii.99

  

  Decathlon B'Twin Bottle Cage Adapter

  • Blazon: Bottle Muzzle Mountain
  • Made of: Plastic
  • Attachment: Clench

  The Decathlon B'Twin Canteen Cage Adapter can be mounted to a handlebar, step, or even seatpost using it's simple rotating clamp-on mount and standard bottle cage mounts. Works dandy with folding bikes or for make hands accessible bottles while riding.

  • Price: £three.99
  • Manufacturer'southward Details: Link
  contract Close

• £two.99

  

  Decathlon B'Twin Universal Bottle Cage Mount

  • Blazon: Canteen Cage Mount
  • Made of: Plastic
  • Attachment: Straps

  The Decathlon B'Twin Universal Bottle Muzzle Mountain is a elementary strap-on adapter for attaching bottle cages to bikes without mounts. The rubber straps arrive like shooting fish in a barrel to attach to most frames.

  • Price: £2.99
  • Manufacturer'southward Details: Link
  contract Shut

• $iii

  

  DMR Hinged Clench Canteen Cage Mount

  • Type: Canteen Cage Mountain
  • Made of: Alloy
  • Attachment: Clamp

  DMR's hinged clamps could be sexier with a more than trim and sleek structure, but for the $3 price, they work well with steel bikes and come in 28.6mm, 31.8mm, and 34.9mm sizes to suit various tubing diameters. The blueprint seems like a no-brainer for adding bottle bosses. Note that they reportedly work with only 10mm bolts.

  • Cost: $3
  • Manufacturer'southward Details: Link
  contract Close

• $22

  

  DOM Monkii Cage and Clip

  • Type: Oversized Bottle Cage and Mountain
  • Made of: Plastic
  • Attachment: Hinged Clamp

  The Free Parable (DOM) Monkii Cage is a universal bottle holder fabricated of Polyamide nylon and designed to fit various canteen diameters. It holds larger capacity bottles with various shapes up to 50 oz (ane.v Liter). DOM claims it's suited for "bumpy and tough roads, mountain biking, bikepacking and adventure cycling." The cage includes two cleats for use with regular bottle bosses.

  The Monkii Clip has 2 round cleats that fit their Monkii cage, Monkii frame bag, or Monkii wedge tool bag. It secures via a hinged clamp to any 25mm-38mm tube, such as frame tube, down tube, handlebar stem or fork leg. It has a maximum Load: i.5 kg / 3.iii lb. Kit includes i adapter, ane M5 25mm screw, one M5 50mm screw, and a rubber shim.

  *Weight shown beneath includes both muzzle (34g) and clip (62g)

  • Weight: 96 grams (3.4 oz)
  • Toll: $22 (cage)
  • Place of Manufacture: Taiwan
  • Buy local, or at Amazon (cage)  Amazon (clip) help Nosotros highly encourage you to buy from a local shop when possible, but if you're going to buy online, you can use our affiliate links. We'll get a very small kickback that will help support this site.
  • Manufacturer'due south Details: Link
  contract Close

• $22.95

  

  DOM Monkii Corset

  • Type: Canteen Cage Mount
  • Made Of: Plastic
  • Attachment: Clamp or Goose egg Necktie

  The DOM Monkii Corset can exist used as a handlebar mounted cage adapter or can exist mounted to larger tubes past removing the clamp and securing via the included zip ties. It's constructed from nylon, has a max load of i.5Kg (three.3lb) and weighs 39 grams.

  • Weight: 39 grams (1.four oz)
  • Cost: $22.95
  • Place of Manufacture: Taiwan
  • Manufacturer's Details: Link
  contract Close

• £7

  

  DrJ0n Limpets

  • Blazon: Canteen Cage Mount
  • Made of: Plastic
  • Attachment: Clamp

  The Limpet is a fascinating new lilliputian product from Drj0n Bagworks, made specifically to mount accessories (racks, lights, canteen cages, etc) to smaller bore tubes, similar truss forks and seat stays. Similar to the Barnacle, it's 3D printed in a hard plastic and clamps around the tube with a single M5 commodities and captive nut. The Limpet is bachelor to fit 16mm, 18mm, 20mm, and 22mm tubes.

  • Toll: £7
  • Place of Manufacture: UK
  • Manufacturer's Details: Link
  contract Shut

• $33

  

  Elite Fifty'Eroica Vintage Bottle Muzzle

  • Type: Mounted Cage
  • Fabricated of: Aluminum/rubber/stainless steel
  • Attachment: 1 Velcro Strap
  • Bottle Size: 70 - 78mm diameter

  Aristocracy's 50'Eroica Vintage Bottle Cage is quite the retrofit. We're not sure how many bikepackers are willing to forego their cockpit bags for this big honking bottle cage, but nosotros thought we'd include information technology for the sake of beingness thorough. The vintage clench-downwardly muzzle holds whatever manner of contemporary beverage vessels.

  • Price: $33
  • Purchase local, or at Amazon (unmarried)  Amazon (double) assist We highly encourage you lot to buy from a local shop when possible, just if y'all're going to purchase online, yous can utilize our affiliate links. We'll go a very small-scale kickback that volition help support this site.
  contract Close
• 

  Elite VIP

  • Type: Bottle Cage Mount
  • Made Of: Plastic
  • Attachment: Zip Tie

  The Elite VIP is made from two nylon PA 66 cable ties consummate with anti-skid rubber shims and mounting bolts for your favourite canteen muzzle. Information technology'southward compatible with tubes from 1″ to 2.viii″ in diameter and can exist mounted virtually anywhere on the cycle.

  • Manufacturer'south Details: Link
  contract Shut

• $11

  

  Fidlock Bottle Twist Bike Base Mount

  • Type: Bottle Cage Mount
  • Fabricated Of: Plastic/Magnets
  • Attachment: 2 Cage Bolts

  Using a similar design as the Uni Base Mount, the Fidlock Cycle Base Mountain mounts to two standard canteen bosses to provide a magnetic attachment for Fidlock's Twist magnetic bottles. "Fifty-fifty the smallest bike frames can at present be fitted with a bike bottle due to the cageless magnetic system. Plus, with its flat and small design, information technology is perfectly integrated into the bike frame without standing out."

  • Weight: sixteen grams (0.vi oz)
  • Price: $11
  • Manufacturer's Details: Link
  contract Close

• $29

  

  Fidlock Bottle Twist Uni Base Mount

  • Blazon: Bottle Cage Mount
  • Fabricated of: Plastic/magnets
  • Attachment: Straps

  The Fidlock Bottle Twist Uni Base of operations Mount is used with Fidlock's Canteen Twist bottles or BOA twist canteen gripper (sold separately) to create a magnetic-mechanical mounting system. The arrangement does abroad with a conventional h2o bottle cage, allowing the bottle to exist attached to any function of the frame. The canteen releases with a twist. We're not sure how durable these would be on rough clay roads, just if anyone has experience with them, get out us a comment below. The Uni base fits tubes 28-62mm.

  • Price: $29
  • Buy local, or at Amazon  Jenson aid We highly encourage you lot to buy from a local shop when possible, just if you're going to buy online, y'all tin utilise our chapter links. We'll get a very small kickback that will help support this site.
  • Manufacturer's Details: Link
  contract Close

• $70

  

  Funner Bike Works Fork Link

  • Type: Canteen / Cargo Cage Mountain
  • Made Of: Chromoly Steel
  • Attachment: Hose Clamps

  Funny Bike Works is owned and operated by Mike Wanner, who at present lives in Bend, Oregon. Mike owned a bike store for xvi years, studied welding for two years, and has congenital over twenty frames for himself and customers. He now offers a mobile wheel repair store in Bend, and has designed a mounting solution for break forks on the side. The Funner Cycle Works Fork Link is a paw crafted 4130 Chromoly Steel adapter designed specifically for pause forks with no mounts. It uses stainless steel hose clamps to mount the adapter to the fork's lowers, providing a standard canteen mount and a 3-pack mount for cargo cages. The Fork Link comes powder coated in emerald woods dark-green, with a clear coat, and weighs 110 grams. They are bachelor to buy as a single Fork Link (with mounting hardware) for $70 USD, or every bit a package with two Fork Links, two Salsa Anything Cages, and all required hardware for $200 USD.

  • Weight: 110 grams (three.ix oz)
  • Cost: $70 (Individual)
  • Place of Manufacture: Oregon, USA
  • Manufacturer's Details: Link
  contract Shut

• $14.99CAD

  

  Giant Bottle Cage Adapter

  • Type: Bottle Muzzle Mount
  • Made Of: CNC Alloy
  • Attachment: Clamp

  Giant's Bottle Cage Adapter uses a hinged clamp design for mounting cages onto tubes 34-36mm in diameter. They are made from a durable CNC 7075 aluminum alloy and cost just $14.99 CAD.

  • Price: $xiv.99CAD
  • Manufacturer's Details: Link
  contract Shut

• $27.99

  

  Granite Design AUX Bottle Muzzle and Strap Kit

  • Type: Bottle Cage Mountain
  • Fabricated Of: Plastic / Safety
  • Attachment: Velcro Strap

  Granite Design's AUX Bottle Cage and Strap Kit is said to solve all your "why can't I fit a canteen to my bike?!" woes. The AUX Bottle Kit includes a lightweight side-load bottle cage which tin be bolted to standard canteen mounts or strapped on with their Strap Kit. The Aux Strap Kit uses silicone coated hook and loop straps and grippy rubber pads to ensure a solid fit on nearly any bike out there. Granite sells the muzzle lone, which weighs 23g, for $20.99 USD, or the entire kit for $27.99 USD.

  • Weight: 23 grams (0.8 oz)
  • Price: $27.99 (Cage + Strap Kit)
  • Manufacturer's Details: Link
  contract Close

• $18AUD

  

  Thou-Lite 3D-printed Muzzle Adapter

  • Type: Triple Muzzle Mount Adapter
  • Made of: 3D-printed Plastic/steel
  • Attachment: Zip ties or Hose Clamps

  K-Lite 3D-printed Cage Adapter is a two or iii hole muzzle mountain for adding canteen cages or anything-style cages to a fork our nether down tube. It attaches to the frame with nothing ties or hose clamps.

  • Price: $18AUD
  • Identify of Manufacture: Commonwealth of australia
  • Manufacturer's Details: Link
  contract Close

• $25AUD

  

  Grand-Lite DobLar Adapter

  • Type: Canteen Cage Mount
  • Made Of: 3D Printed Plastic/Steel
  • Attachment: 2 Cage Bolts

  Thou-Low-cal's DobLar Adapter is designed to double the mounting locations on forks with only standard 2 bolt bottle mounts. The DobLar Adapter can too be used on downtubes or anywhere else where you could apply more storage. There are also several dissimilar slots for strapping gear on securely. It's available in both a ii bolt and 3 bolt version and 3D printed at Chiliad-Low-cal headquarters in Australia.

  • Price: $25AUD (Short)
  • Place of Manufacture: Australia
  • Manufacturer's Details: Link
  contract Close

• £xi.99

  

  Kieft Racing Passport Water Bottle Boss Adapters

  • Type: Canteen Cage Mount
  • Made Of: Aluminum
  • Attachment: 2 Muzzle Bolts

  The Passport Water Bottle Boss Adapters from Kieft Racing mount into a standard canteen cage mount, merely provide further adjustment to make room for frame bags or on small frames. They provide most 35mm of adjustment, include stainless steel mounting bolts, and are made from cast machined aluminum.

  • Price: £11.99
  • Place of Manufacture: Hampshire, UK
  • Manufacturer'southward Details: Link
  contract Close

• £28

  

  Kieft Racing Suspension Fork Cage Clamp Kit

  • Type: Suspension Fork Mount
  • Made Of: Plastic/Steel
  • Zipper: Clamps

  Fabricated my Kieft Racing, the Interruption Fork Cage Clamp Kit contains six clamps to deeply clamp two three-bolt style cargo cages onto your intermission fork. The kit contains all necessary hardware, including stainless steel bolts, spacers, anti vibration collars, soft mount rubbers, and even some clear Rhino tape to protect your fork. There are three different models designed specifically for the RockShox Bluto, Fox Forks, and standard RockShox forks. If you're planning on just mounting standard bottle cages, there'south a Bottle Cage Clamp Kit that comes with two clamps for a bit cheaper.

  • Price: £28 (Six Clamps)
  • Place of Industry: Hampshire, UK
  • Manufacturer's Details: Link
  contract Close

• £28

  

  Kieft Racing Truss Fork Clamps

  • Type: Truss Fork Cage Mounts
  • Made of: Plastic/steel
  • Zipper: Clamps

  Fabricated past Kieft Racing for Jones Truss forks, this kit allows y'all to mount a bottle cage or Annihilation cage on your Jones Truss fork. Buy options include 2 clamps for a single h2o bottle cage, iv clamps for two bottle cages, or 6 clamps for ii Anything-style cages.

  • Price: £28 (Six clamps)
  • Place of Manufacture: Hampshire, Britain
  • Manufacturer'due south Details: Link
  contract Close

• $8

  

  Rex Cage Top Cap Cage Mountain

  • Blazon: Bottle Cage Mount
  • Made of: Aluminum
  • Attachment: Top Cap Bolt

  King Muzzle has a unique option for conveying an extra bottle. The Top Cap Cage Mount is a simple, affordable, and easy to use solution that is fabricated in the United States. Simply install it in place of your acme cap and bolt on the cage.

  • Weight: 9 grams (0.iii oz)
  • Toll: $8
  • Place of Industry: Colorado, Us
  • Buy local, or at Amazon assist We highly encourage you lot to buy from a local shop when possible, simply if you're going to buy online, y'all tin use our chapter links. We'll get a very small-scale kickback that will help back up this site.
  • Manufacturer'southward Details: Link
  contract Close

• $15

  

  M-Wave 2 Bike Canteen Muzzle Adapter

  • Type: Double Canteen Mount
  • Made of: Alloy
  • Attachment: two muzzle bolts

  The M-Wave 2 Bike Bottle Cage Adapter is fabricated from a unmarried piece of aluminum alloy and bolts to any pair of bottle cage mounts to convert information technology to two pair. Nosotros haven't used i of these yet, but it looks fairly simple.

  • Weight: 9 grams (0.3 oz)
  • Cost: $15
  • Purchase local, or at Amazon help We highly encourage you to purchase from a local shop when possible, but if you're going to buy online, you tin can utilize our chapter links. We'll get a very small kickback that volition assist support this site.
  contract Shut

• $15

  

  Mountain Skidmore Bottle Cage Adapter

  • Type: Bottle Cage Adapter
  • Made Of: Aluminum
  • Zipper: ii Cage Bolts

  Mount Skidmore's Canteen Cage Adapter allows you lot to shift your bottle cage upwardly to ii″ (5cm) up or down to notice the perfect fit when running multiple bottles or a frame handbag. It weighs just 38 grams, is fabricated from 6061 aluminum, and comes in anodized black or silver. Those purchasing from the U.s. tin purchase the Bottle Cage Adapter through Rogue Panda Designs.

  • Weight: 38 grams (1.3 oz)
  • Cost: $fifteen
  • Place of Manufacture: Australia
  • Manufacturer's Details: Link
  contract Close

• $l

  

  Paragon Motorcar Works 2h2o Mounting Organization

  • Type: Bottle Cage Mount, Alt Position
  • Fabricated Of: Aluminum
  • Attachment: Steerer Tube

  Designed by Luis Lopez, a Machinist and Product Designer at Paragon Machine Works in California, the 2h2o Mounting System is a unique dual bottle mount that fits near whatsoever type of bike. The 2h2o Mounting System attaches to the bike'southward steerer tube, taking the place of a stem spacer, and has ii adjustable arms that allows for the mounting of two standard bottle cages or compatible cargo cages. Paragon says it'due south designed to exist "enjoyed within moderate riding conditions", so we're not sure how it well it would agree upward on rough singletrack or bumpy terrain.

  It uses a pin and slot design for linear and rotational adjustments so that mounted items can exist optimally placed to maximize knee clearance and handlebar turning radius. It is machined in California from 6061 Aluminum, is rated for 2lbs per muzzle mountain, and looks like information technology could be a clever solution for those with express bag infinite or a cramped cockpit.

  • Weight: 150 grams (5.iii oz)
  • Price: $fifty
  • Place of Manufacture: California, Usa
  • Manufacturer'southward Details: Link
  contract Shut

• $9.99

  

  Problem Solvers Canteen Cage Height Adapter

  • Type: Bottle Muzzle Mountain
  • Fabricated Of: Aluminum
  • Zipper: 2 Cage Bolts

  The Problem Solvers Bottle Muzzle Height Adapter does just that. The peak adaptable adapter provides 45mm of fore and aft adjustment for when your cage mounts only aren't in the correct place. The have a weight limit of a full 28oz h2o bottle, so don't go loading information technology upward with camping ground gear, and is made from aluminum.

  • Cost: $9.99
  • Manufacturer'south Details: Link
  contract Shut

• $20

  

  SKS Anywhere Topcage

  • Type: Bottle Cage Mount
  • Made Of: Plastic/Rubber
  • Zipper: Velcro Strap

  The SKS Anywhere Topcage provides a simple mounting solution for frames without bottle cage mounts. Simply strap on the Anywhere Topcage, and you lot're proficient to get! It uses two velcro straps, and condom grips on the behind of the cage to go on things in identify.

  • Price: $twenty
  • Manufacturer'south Details: Link
  contract Close

• $fourteen

  

  SKS Anywhere Water Bottle Mounts

  • Blazon: Bottle Cage Mountain
  • Made of: Plastic/Rubber
  • Attachment: Velcro Straps

  As its proper noun implies, the SKS Anywhere canteen muzzle adapter mounts anywhere on the bike frame using velcro straps. The pair includes long straps for wider frame tube diameters from 50 to 80mm.

  • Price: $fourteen
  • Buy local, or at Jenson  Amazon help We highly encourage you to buy from a local shop when possible, just if you're going to purchase online, you tin employ our chapter links. We'll get a very small kickback that will help support this site.
  • Manufacturer's Details: Link
  contract Close

• $11

  

  SKS Canteen Cage Adapter

  • Type: Bottle Cage Mount
  • Made of: Plastic/Rubber
  • Attachment: Velcro Strap

  The SKS bottle holder adapter can be attached to the seat post, the stalk, or about anywhere with its adjustable SKS quick-release mount system. It also pivots for angle adjustment.

  • Price: $11
  • Buy local, or at Amazon assistance Nosotros highly encourage you lot to buy from a local store when possible, but if you're going to buy online, you lot can apply our affiliate links. We'll go a very small-scale kickback that will help support this site.
  • Manufacturer'south Details: Link
  contract Close

• $12

  

  Topeak Alt-Position Mount

  • Type: Alt Muzzle Position
  • Made of : Aluminum
  • Attachment: two bolts/bosses

  Similar to the Wolf Tooth B-RAD, Topeak'south Alt-Position Muzzle Mount provides a uncomplicated fashion to raise or lower h2o bottle cages so they can piece of work better with frame numberless, big bottles, other gear, or in tight spaces. It is a simple solution that can heighten or lower a bottle cage by 32mm. Each mountain measures x.eight ten 1.ii x nine cm (4.3" x 0.five" x 3.5").

  • Weight: 25 grams (0.nine oz)
  • Cost: $12
  • Place of Manufacture: Taiwan
  • Buy local, or at Amazon assist We highly encourage you to purchase from a local shop when possible, but if yous're going to purchase online, yous can utilise our affiliate links. We'll become a very small kickback that volition help back up this site.
  • Manufacturer'due south Details: Link
  contract Shut

• $10

  

  Topeak VersaMount Clamps

  • Type: Bottle Cage Mountain
  • Fabricated of: Engineering grade polymer
  • Zipper: Strap

  Made of engineering grade polymer, Topeak's Versamount clamps provide a pair of eyelets for an additional h2o bottle cage or other accessories. The band style clamp is made of engineering grade polymer and provides a pipe-clamp style worm-screw installation. The clamp fits tubes from 20-60mm and has a load limit of i.5 kg (3.31 lbs).

  

  • Weight: 26 grams (0.ix oz)
  • Cost: $10
  • Buy local, or at Jenson  Amazon help Nosotros highly encourage yous to buy from a local shop when possible, simply if yous're going to buy online, you lot can use our affiliate links. We'll get a very pocket-size kickback that will assistance support this site.
  • Manufacturer'southward Details: Link
  contract Close

• $15

  

  Tubus Mid-Fork Eyelets

  • Blazon: Rack Mount
  • Made of: Aluminum/Rubber
  • Attachment: Clamp

  While we haven't seen these in use as canteen mounts, and it's doubtful that Tubus would endorse them as such, it seems just logical that a pair could be used to mount a muzzle. Mid-Fork Eyelets bolt on and are bachelor in two sizes: twenty-32mm, and oversized 33-40mm. That said, they are probable a bit as well heavy to justify for this application. And, at $24, they're non inexpensive.

  • Cost: $15
  • Buy local, or at Amazon help We highly encourage you to buy from a local shop when possible, merely if you lot're going to buy online, you tin can apply our affiliate links. Nosotros'll get a very small kickback that volition help back up this site.
  • Manufacturer's Details: Link
  contract Shut

• $24

  

  Twofish Quick Cage (24oz)

  • Blazon: Mounted Bottle Cage
  • Made of: Stainless Steel/Rubber
  • Attachment: Velcro
  • Bottle Size: 24oz Stainless

  The 24 oz vinyl-coated stainless steel Quick Cage is specifically designed to hold reusable stainless steel bottles such as the Klean Kanteen. Otherwise, it holds bottles from 16 oz to 26 oz, including standard bidons and single-walled, insulated, or plastic bottles. The muzzle mounts with a single large velcro strap.

  • Cost: $24
  • Place of Manufacture: United states of america
  • Buy local, or at Amazon help We highly encourage you to buy from a local shop when possible, but if you're going to buy online, you tin use our affiliate links. We'll get a very pocket-size kickback that volition help back up this site.
  • Manufacturer's Details: Link
  contract Close

• $31

  

  Twofish Quick Cage (32-40oz)

  • Type: Mounted Oversized Bottle Muzzle
  • Made of: Stainless Steel/Safety
  • Zipper: Velcro
  • Canteen Size: 32-40oz

  The 40 oz vinyl-coated stainless steel Quick Muzzle is designed to concur large bottles like the 40 oz Klean Kanteen, a popular selection amongst bikepackers. It also holds other bottles from 32 oz to 40 oz sizes, including a standard Nalgene. The cage adapter mounts with two large velcro straps.

  • Price: $31
  • Identify of Manufacture: Us
  • Buy local, or at Amazon help We highly encourage you to buy from a local shop when possible, just if y'all're going to buy online, you lot tin use our affiliate links. Nosotros'll get a very pocket-sized kickback that will help support this site.
  • Manufacturer's Details: Link
  contract Shut
• 

  Twofish Quick Cage (64oz)

  • Type: Mounted Oversized Bottle Muzzle
  • Made of: Stainless Steel/Safety
  • Attachment: 2 Velcro Straps
  • Canteen size: 64oz/growler

  The Growler Quick Cage is specifically designed to concur 64 oz stainless steel bottles. It's available in 2 sizes, to adjust either unmarried-walled (64 oz Klean Kanteen) or insulated bottle made by manufacturers such as Klean Kanteen and Hydro Flask. The cage adapter mounts with two large velcro straps.

  • Identify of Industry: USA
  • Buy local, or at Amazon help We highly encourage you to buy from a local shop when possible, simply if y'all're going to buy online, you can use our chapter links. Nosotros'll get a very minor kickback that will help support this site.
  • Manufacturer's Details: Link
  contract Close

• $22

  

  TwoFish Quick Cage (Standard)

  • Blazon: Mounted Bottle Muzzle
  • Made of: Stainless Steel/prophylactic
  • Attachment: Velcro Strap
  • Bottle Size: Standard water bottle

  Goes on any bike, anywhere room is available on the frame or seat post. A convenient and price-effective way to put a water bottle cage on a bicycle without affix-ons. Includes a 23oz water canteen with the Twofish insignia.

  • Price: $22
  • Place of Manufacture: United states
  • Buy local, or at Amazon help We highly encourage you lot to buy from a local store when possible, but if you're going to buy online, you lot can utilise our affiliate links. We'll become a very small kickback that will aid back up this site.
  • Manufacturer'due south Details: Link
  contract Shut

• $15

  

  Twofish Quick Cage Adapter

  • Type: Bottle Cage Mountain
  • Made of: Aluminum/Rubber
  • Attachment: Velcro strap

  The Quick Cage Adapter has a flexible safety block and hook-and-loop strap that loops around an aluminum subclass. This secures any standard cage onto downtubes, seatposts, or anywhere infinite is available, according to Twofish. We've heard pretty practiced reports on this solution, merely have yet to try it.

  • Cost: $15
  • Identify of Industry: U.s.
  • Buy local, or at Jenson  Amazon help We highly encourage you to buy from a local store when possible, simply if y'all're going to buy online, yous tin use our chapter links. We'll get a very small kickback that volition assistance support this site.
  • Manufacturer'due south Details: Link
  contract Close

• $iii

  

  Velo Orange Bottle Cage Clamps

  • Type: Bottle Cage Mount
  • Made of: Stainless Steel
  • Attachment: Clamp

  Like in nature to a pair of piping clamps, admitting a bit more elegant, the velo Orange Bottle Cage Clamp is used to concord a h2o bottle cage on bikes without braze-ons. And, as with pipe clamps, they work best with cages that have elongated mounting tabs, such equally the Salsa Nickless Cage. The VO Bottle Muzzle Clamp is designed to be used just on non-oversized frame tubes.

  • Cost: $3
  • Manufacturer's Details: Link
  contract Shut

• $7.4

  

  Velo Orangish Handlebar to Bottle Cage Mountain

  • Blazon: Bottle Cage Mount
  • Made of: Alloy
  • Attachment: Clamp

  The VO Handlebar to Bottle Cage Mount allows yous to affix water bottle cages on your handlebars. They are constructed out of extruded aluminum and but fit bars upwardly to 25.4mm.

  • Cost: $vii.four
  • Buy local, or at Amazon help We highly encourage you to buy from a local shop when possible, simply if you're going to buy online, you tin use our affiliate links. We'll get a very small-scale kickback that volition help back up this site.
  • Manufacturer's Details: Link
  contract Shut

• $15.9

  

  Vincita Stem Top Cap Bottle Cage Adapter

  • Type: Bottle Muzzle Mount
  • Made Of: Aluminum
  • Attachment: Top Cap Bolt

  Bangok-based Vincita specializes in bike touring bags, racks, and panniers—with a potent focus on folding bike accessories and travel gear. Their Stem Top Cap Bottle Cage Adapter replaces your current stem cap to provide a simple ii bolt mountain for a standard bottle cage, has an adjustable bending, and is made from a lightweight aluminum blend.

  • Weight: 42 grams (1.5 oz)
  • Price: $15.9
  • Manufacturer's Details: Link
  contract Shut

• $29.99CAD

  

  Wildwood Lower Mounts

  • Type: BOTTLE Muzzle MOUNT
  • Made of: Nylon
  • Attachment: Zip Ties

  The Wildwood Lower Mounts are some of the lowest profile mounts we've seen. They attach to your fork using a zip-necktie and are made from nylon so they should exist strong still lightweight. And in truthful Wildwood fashion, they are made in Canada!

  • Price: $29.99CAD (Pair)
  • Place of Manufacture: Canada
  • Manufacturer'south Details: Link
  contract Close

• $25

  

  WOHO ANTI SWAY Saddlebag Stabilizer

  • Type: Bottle Muzzle Mounts (2)
  • Fabricated of: Steel
  • Attachment: Saddle clamp

  Inspired by triathlon-fashion bottle mounts, the original WOHO Xtouring ANTI SWAY Bag Stabilizer was designed to eliminate saddle bag sway, or tail wag, due to heavy, large bikepacking seat bags. And, it offers two boosted canteen cage mounts, an interesting solution for bikepacking routes or races in hot environments. See our full printing release.

  • Weight: 77 grams (2.7 oz)
  • Cost: $25
  • Identify of Manufacture: Taiwan
  • Manufacturer's Details: Link
  contract Close

• $nineteen.95

  

  Wolf Tooth B-RAD Bottle Shift

  • Blazon: Bottle Cage Mount/ Alt Position
  • Made of: Aluminum
  • Attachment: 2 bolts

  The B-RAD Bottle Shift is designed to make bottles easier to access by shifting the bottle cage 9mm outward and angled past ten°. It looks ideal for full-suspension mountain bikes, where the rear shock limits the amount of useable space in the front triangle. In true B-RAD fashion, slotted mounts assistance fine tune the position of the cage and offset mounting holes allow for a bottle muzzle and mitt pump to be mounted side-past-side.

  The B-RAD Bottle Shift is machined from 6061-T6 aluminum, weighs 24g, and has a load capacity of 1700g (three.7lb). The new mountain retails for $19.95 and tin be purchased from your local Wolf Tooth dealer or online from WolfToothComponents.com.

  • Weight: 24 grams (0.eight oz)
  • Price: $19.95
  • Place of Industry: United states of america
  • Manufacturer'south Details: Link
  contract Close

• $23

  

  Wolf Tooth B-RAD Double Bottle mount

  • Type: Bottle Cage Mount, Alt Position
  • Fabricated of: Aluminum
  • Attachment: ii bolts per pair

  The B-RAD Double Bottle Adapter consists of 2 of slotted mounts designed to mount two h2o bottle cages side past side. The mounts require the employ of a B-RAD base, typically the B-RAD 3 or iv. Theoretically, when mounted on the downtube, the B-RAD 3 or 4 moves the bottles up so they don't interfere with your legs.

  • Weight: 20 grams (0.7 oz)
  • Toll: $23
  • Identify of Manufacture: Minnesota, United states of america
  • Buy local, or at Amazon  Jenson assist We highly encourage yous to buy from a local shop when possible, but if you lot're going to buy online, you can use our affiliate links. We'll get a very small kickback that will help support this site.
  • Manufacturer's Details: Link
  contract Shut

• $24.95

  

  Wolf Molar B-Rad Everywhere Base of operations

  • Blazon: Bottle Cage Mount
  • Fabricated of: Aluminum
  • Attachment: Velcro Straps

  The Wolf Tooth B-Rad Everywhere Base is a uncomplicated velcro-mounted aluminum base, that tin be strapped onto your frame to provide an boosted mounting bespeak. The velcro straps are silicone-backed to concur the base securely in identify, foam pads with agglutinative backings are included to protect your bicycle'due south frame, and the Everywhere Base comes in both a two-bolt and three-bolt version—the latter being more appropriate for cargo cages and heavier loads.

  • Weight: 38 grams (1.3 oz)
  • Price: $24.95 (Everywhere Base 2)
  • Place of Industry: USA
  • Manufacturer's Details: Link
  contract Close

• $7.99

  

  Zefal Gizmo Universal Mount

  • Blazon: Bottle Cage Mountain
  • Fabricated of: Plastic/aluminum
  • Attachment: Zip Tie straps

  The Zefal Gizmo includes two clamps for mounting a single bottle cage. Each clamp has two nil-tie straps, a plastic mount with a threaded bolt hole, an M5 bolt, and safety padding strips. The Gizmo fits tubing diameters from 15 to 75mm.

  • Weight: 36 grams (one.iii oz)
  • Cost: $7.99
  • Purchase local, or at Amazon help We highly encourage you to buy from a local shop when possible, but if you're going to purchase online, y'all can use our affiliate links. We'll get a very pocket-sized kickback that will assist support this site.
  • Manufacturer'south Details: Link
  contract Close

Adding Permanent Bottle Muzzle Mounts to Your Frame

If you lot aren't upwards for clamping, strapping, or taping mounts to your frame, there are two means to permanently add bottle bosses to your frame or fork.

Hire a Framebuilder

While it's possible to have a carbon adept drill and gum bottle mounts in a carbon frame, and there's likely a way to weld in bosses on an aluminum frame, both of those scenarios go pretty complicated. We won't even become into it. Notwithstanding, if you lot have a steel frame, it's pretty straightforward. We had bosses added to the underside of two v1 Bearish Trolls' downtubes (before they became a standard feature). Information technology works similar a charm and doesn't cost too much. Yet, framebuilders are a busy lot, then you might have to wait. In addition, when deciding where the bosses are going to become, consider tire clearance when your suspension fork is compressed, if you run i. And, realize that brazing will impairment the terminate on your bike, which might require a repaint, or at least a partial respray.

Rivnut Canteen Bosses

"Rivnuts," also known as rivet nuts or threaded rivet inserts, are one-piece, internally threaded tubular rivets that tin can be anchored from one side. To clarify, a rivnut attaches by way of a threaded tool that compresses it, buckles one side, and clamps information technology onto the panel into which it's beingness riveted. If you don't heed drilling your fork or frame, this is a good solution that tin be implemented for a fairly reasonable toll. We did information technology on a Surly Troll and rode it thousands of miles with no issue. Read virtually the process hither. Note that ane advantage to Rivnuts is that they don't crave a respray, but the disadvantage is they could rattle loose. Besides, this process is best done on burly forks rather than ones that are lightweight and slender.

Attaching Canteen Cages to Your Bike (DIY)

In this Bikepacking Hacks video, Neil discusses the importance of mounts and cages and demonstrates six DIY methods of adding them to your bike. Watch that below and scroll down for a list of DIY methods

Hose Clamp Canteen Cage

Hose clamps (aka pipage clamps) are the most common method used to attach bottle cages onto suspension forks or a boss-less metal wheel frame. We don't recommend this method for a carbon fork, although we've seen it washed with padding and a lite bear upon. Hose clamps are measured in diameter, so y'all'll need to calculate the tubing size plus the cage you lot're clamping; I typically use a three.0″ clamp on a fox 34 or RockShox fork (mutual break forks accept a 1.75″ bore) sandwiching a layer of recycled inner tube or electrical tape to protect the tubing. Tighten information technology enough to concord the cage in identify (but not as well tight on a pause fork). Note that some cages work especially well for this. Widefoot's oversized cage has strap slots and Salsa'south Nickless Cage has slots through which the straps tin be threaded. Others have tabs. With some cages, y'all might need longer piping clamps to strap effectually the tubular rails.

Electrical Tape Bottle Cages

First seen in our listing of Bikepacking Hacks, electric record is probably the safest and most trustworthy method of attaching standard bottle cages to a fork, downtube, interruption fork, or just about anywhere, even on oversized tubes. For a secure mountain, apply about 2/iii of a roll of electric tape. The Lezyne Power Cages work great for this. To protect your frame, kickoff apply a little tape where the cage will make contact. The muzzle shown above lasted close to 1,000 miles while bikepacking and trail riding all over the rugged southwest, and it was removed earlier showing any signs of wearable. The great thing about electrical tape is that is comes off easily without residue.

Aught Ties and Tubes

Although this is our least favorite method for attaching a bottle cage to a fork or downtube, it tin can work with the right aught ties and appropriate load. While nil ties are strong, they're not as potent as metal straps, and they accept a tendency to dry rot and wear down over time. Either manner, this method works. Utilise the beefiest nada ties yous tin can notice, and similar the pipe-clamp method, sandwich cut pieces of recycled inner tube betwixt the cage and tubing to prevent slippage and abrasion.

Voile Straps

Voile straps are highly useful for bolstering big h2o bottles in more flimsy cages, specially on very rough terrain. Yet, strapping a cage onto a frame with Voiles is also doable. You tin can do information technology with some cages that accept slots large enough to fit the straps. Or, on oversized cages, you lot can but strap on the muzzle, then strap the bottle to that. Information technology's a little messy, but doable. Note that information technology's improve for use with carbon or aluminum oversized downtubes.

Equally with our other Gear Indexes, please let us know in the comments if yous are aware of another product or hack to add bottle cage mounts to your bike, or ways to carry an extra water bottle.

Source: https://bikepacking.com/index/add-cage-mounts-bike/

Posted by: edwardsgothe2000.blogspot.com

Share this post